matplotlib.pyplot.boxplot

matplotlib.pyplot.boxplot(x, notch=None, sym=None, vert=None, whis=None, positions=None, widths=None, patch_artist=None, bootstrap=None, usermedians=None, conf_intervals=None, meanline=None, showmeans=None, showcaps=None, showbox=None, showfliers=None, boxprops=None, labels=None, flierprops=None, medianprops=None, meanprops=None, capprops=None, whiskerprops=None, manage_ticks=True, autorange=False, zorder=None, *, data=None)[source]

Make a box and whisker plot.

Make a box and whisker plot for each column of x or each vector in sequence x. The box extends from the lower to upper quartile values of the data, with a line at the median. The whiskers extend from the box to show the range of the data. Flier points are those past the end of the whiskers.

Parameters:
xArray or a sequence of vectors.

The input data.

notchbool, default: False

Whether to draw a noteched box plot (True), or a rectangular box plot (False). The notches represent the confidence interval (CI) around the median. The documentation for bootstrap describes how the locations of the notches are computed.

Note

In cases where the values of the CI are less than the lower quartile or greater than the upper quartile, the notches will extend beyond the box, giving it a distinctive "flipped" appearance. This is expected behavior and consistent with other statistical visualization packages.

symstr, optional

The default symbol for flier points. An empty string ('') hides the fliers. If None, then the fliers default to 'b+'. More control is provided by the flierprops parameter.

vertbool, default: True

If True, draws vertical boxes. If False, draw horizontal boxes.

whisfloat or (float, float), default: 1.5

The position of the whiskers.

If a float, the lower whisker is at the lowest datum above Q1 - whis*(Q3-Q1), and the upper whisker at the highest datum below Q3 + whis*(Q3-Q1), where Q1 and Q3 are the first and third quartiles. The default value of whis = 1.5 corresponds to Tukey's original definition of boxplots.

If a pair of floats, they indicate the percentiles at which to draw the whiskers (e.g., (5, 95)). In particular, setting this to (0, 100) results in whiskers covering the whole range of the data. "range" is a deprecated synonym for (0, 100).

In the edge case where Q1 == Q3, whis is automatically set to (0, 100) (cover the whole range of the data) if autorange is True.

Beyond the whiskers, data are considered outliers and are plotted as individual points.

bootstrapint, optional

Specifies whether to bootstrap the confidence intervals around the median for notched boxplots. If bootstrap is None, no bootstrapping is performed, and notches are calculated using a Gaussian-based asymptotic approximation (see McGill, R., Tukey, J.W., and Larsen, W.A., 1978, and Kendall and Stuart, 1967). Otherwise, bootstrap specifies the number of times to bootstrap the median to determine its 95% confidence intervals. Values between 1000 and 10000 are recommended.

usermediansarray-like, optional

A 1D array-like of length len(x). Each entry that is not None forces the value of the median for the corresponding dataset. For entries that are None, the medians are computed by Matplotlib as normal.

conf_intervalsarray-like, optional

A 2D array-like of shape (len(x), 2). Each entry that is not None forces the location of the corresponding notch (which is only drawn if notch is True). For entries that are None, the notches are computed by the method specified by the other parameters (e.g., bootstrap).

positionsarray-like, optional

Sets the positions of the boxes. The ticks and limits are automatically set to match the positions. Defaults to range(1, N+1) where N is the number of boxes to be drawn.

widthsfloat or array-like

Sets the width of each box either with a scalar or a sequence. The default is 0.5, or 0.15*(distance between extreme positions), if that is smaller.

patch_artistbool, default: False

If False produces boxes with the Line2D artist. Otherwise, boxes and drawn with Patch artists.

labelssequence, optional

Labels for each dataset (one per dataset).

manage_ticksbool, default: True

If True, the tick locations and labels will be adjusted to match the boxplot positions.

autorangebool, default: False

When True and the data are distributed such that the 25th and 75th percentiles are equal, whis is set to (0, 100) such that the whisker ends are at the minimum and maximum of the data.

meanlinebool, default: False

If True (and showmeans is True), will try to render the mean as a line spanning the full width of the box according to meanprops (see below). Not recommended if shownotches is also True. Otherwise, means will be shown as points.

zorderfloat, default: Line2D.zorder = 2

Sets the zorder of the boxplot.
Returns:
dict

A dictionary mapping each component of the boxplot to a list of the Line2D instances created. That dictionary has the following keys (assuming vertical boxplots):

  • boxes: the main body of the boxplot showing the quartiles and the median's confidence intervals if enabled.
  • medians: horizontal lines at the median of each box.
  • whiskers: the vertical lines extending to the most extreme, non-outlier data points.
  • caps: the horizontal lines at the ends of the whiskers.
  • fliers: points representing data that extend beyond the whiskers (fliers).
  • means: points or lines representing the means.
Other Parameters:
showcapsbool, default: True

Show the caps on the ends of whiskers.

showboxbool, default: True

Show the central box.

showfliersbool, default: True

Show the outliers beyond the caps.

showmeansbool, default: False

Show the arithmetic means.

cappropsdict, default: None

The style of the caps.

boxpropsdict, default: None

The style of the box.

whiskerpropsdict, default: None

The style of the whiskers.

flierpropsdict, default: None

The style of the fliers.

medianpropsdict, default: None

The style of the median.

meanpropsdict, default: None

The style of the mean.

Notes

Note

In addition to the above described arguments, this function can take a data keyword argument. If such a data argument is given, every other argument can also be string s, which is interpreted as data[s] (unless this raises an exception).

Objects passed as data must support item access (data[s]) and membership test (s in data).

Examples using matplotlib.pyplot.boxplot