matplotlib.axes.Axes.cohere

Axes.cohere(self, x, y, NFFT=256, Fs=2, Fc=0, detrend=<function detrend_none at 0x7fba54bf6820>, window=<function window_hanning at 0x7fba54bf6160>, noverlap=0, pad_to=None, sides='default', scale_by_freq=None, *, data=None, **kwargs)

Plot the coherence between x and y.

Plot the coherence between x and y. Coherence is the normalized cross spectral density:

\[C_{xy} = \frac{|P_{xy}|^2}{P_{xx}P_{yy}}\]

Parameters:

Fsfloat, default: 2

The sampling frequency (samples per time unit). It is used to calculate the Fourier frequencies, freqs, in cycles per time unit.

windowcallable or ndarray, default: window_hanning

A function or a vector of length NFFT. To create window vectors see window_hanning, window_none, numpy.blackman, numpy.hamming, numpy.bartlett, scipy.signal, scipy.signal.get_window, etc. If a function is passed as the argument, it must take a data segment as an argument and return the windowed version of the segment.

sides{'default', 'onesided', 'twosided'}, optional

Which sides of the spectrum to return. 'default' is one-sided for real data and two-sided for complex data. 'onesided' forces the return of a one-sided spectrum, while 'twosided' forces two-sided.

pad_toint, optional

The number of points to which the data segment is padded when performing the FFT. This can be different from NFFT, which specifies the number of data points used. While not increasing the actual resolution of the spectrum (the minimum distance between resolvable peaks), this can give more points in the plot, allowing for more detail. This corresponds to the n parameter in the call to fft(). The default is None, which sets pad_to equal to NFFT

NFFTint, default: 256

The number of data points used in each block for the FFT. A power 2 is most efficient. This should NOT be used to get zero padding, or the scaling of the result will be incorrect; use pad_to for this instead.

detrend{'none', 'mean', 'linear'} or callable, default 'none'

The function applied to each segment before fft-ing, designed to remove the mean or linear trend. Unlike in MATLAB, where the detrend parameter is a vector, in Matplotlib is it a function. The mlab module defines detrend_none, detrend_mean, and detrend_linear, but you can use a custom function as well. You can also use a string to choose one of the functions: 'none' calls detrend_none. 'mean' calls detrend_mean. 'linear' calls detrend_linear.

scale_by_freqbool, default: True

Whether the resulting density values should be scaled by the scaling frequency, which gives density in units of Hz^-1. This allows for integration over the returned frequency values. The default is True for MATLAB compatibility.

noverlapint, default: 0 (no overlap)

The number of points of overlap between blocks.

Fcint, default: 0

The center frequency of x, which offsets the x extents of the plot to reflect the frequency range used when a signal is acquired and then filtered and downsampled to baseband.

Returns:

Cxy1-D array

The coherence vector.

freqs1-D array

The frequencies for the elements in Cxy.

Other Parameters:

**kwargs

Keyword arguments control the Line2D properties:

Property	Description
agg_filter	a filter function, which takes a (m, n, 3) float array and a dpi value, and returns a (m, n, 3) array
alpha	float or None
animated	bool
antialiased or aa	bool
clip_box	Bbox
clip_on	bool
clip_path	Patch or (Path, Transform) or None
color or c	color
contains	unknown
dash_capstyle	{'butt', 'round', 'projecting'}
dash_joinstyle	{'miter', 'round', 'bevel'}
dashes	sequence of floats (on/off ink in points) or (None, None)
data	(2, N) array or two 1D arrays
drawstyle or ds	{'default', 'steps', 'steps-pre', 'steps-mid', 'steps-post'}, default: 'default'
figure	Figure
fillstyle	{'full', 'left', 'right', 'bottom', 'top', 'none'}
gid	str
in_layout	bool
label	object
linestyle or ls	{'-', '--', '-.', ':', '', (offset, on-off-seq), ...}
linewidth or lw	float
marker	marker style string, Path or MarkerStyle
markeredgecolor or mec	color
markeredgewidth or mew	float
markerfacecolor or mfc	color
markerfacecoloralt or mfcalt	color
markersize or ms	float
markevery	None or int or (int, int) or slice or List[int] or float or (float, float) or List[bool]
path_effects	AbstractPathEffect
picker	unknown
pickradius	float
rasterized	bool or None
sketch_params	(scale: float, length: float, randomness: float)
snap	bool or None
solid_capstyle	{'butt', 'round', 'projecting'}
solid_joinstyle	{'miter', 'round', 'bevel'}
transform	matplotlib.transforms.Transform
url	str
visible	bool
xdata	1D array
ydata	1D array
zorder	float

Notes

Note

In addition to the above described arguments, this function can take a data keyword argument. If such a data argument is given, the following arguments can also be string s, which is interpreted as data[s] (unless this raises an exception): x, y.

Objects passed as data must support item access (data[s]) and membership test (s in data).

References

Bendat & Piersol -- Random Data: Analysis and Measurement Procedures, John Wiley & Sons (1986)

Examples using matplotlib.axes.Axes.cohere